Corrosion ProtectionEpoxy plates & corrosion-protected framework
Epoxy-coated heat transfer plates, a corrosion-protected framework and lacquered plate edges for demanding applications such as coastal environments.
Plate Heat Exchangers – Cross-flow & Counter-flow
HEATEX plate heat exchangers for air handling units and ventilation systems in Egypt, with no moving parts and Eurovent-certified performance.
Counter-flowHeat Exchanger
Cross-flowHeat Exchanger
HEATEX · SWEDEN Exclusive distributor in Egypt
Cross-flow & Counter-flow Plate Heat Exchangers
HEATEX plate heat exchangers are fixed recuperators: supply and exhaust air pass through separate channels formed by thin aluminium plates, so there is no moving part and almost no air carry-over. Typical leakage is below 0.1 % of nominal airflow, so no leakage contribution needs to be assumed in EATR calculations for the AHU.
0 moving partsFixed aluminium plate recuperator
< 0.1 %Typical air leakage
Al · Epoxy · SSPlate materials
Eurovent · AHRICertified selection software
Applications
- HVAC Systems
- Industrial Facilities
- Hospitals & Pharmaceutical Plants
- Energy Recovery for Ventilation
- Thermal Management
- Air Handling Units (AHU)
- Commercial Buildings
- Data Centers
- Technical Cooling
- Condensation Drying
Cross-flow heat exchanger features
All HEATEX cross-flow heat exchangers share these features:
- Extruded aluminium corner profiles · stainless steel is optional.
- Double sealing · gluing plus a mechanical fold prevents leakage and contamination.
- Corrugated plate pattern · more turbulence and heat transfer without stagnation points.
- Flat or folded end plates · for every mounting interface.
Choose your cross-flow model
| HEATEX model | H | H2 | P | Z | Z2 |
|---|---|---|---|---|---|
| Typical applications | Process ventilation | Comfort ventilation | High-pressure applications | Highly corrosive / harsh conditions | Highly corrosive / harsh conditions |
| Efficiency (relative) | High | Superior | High | High | Superior |
| Airflow capacity (relative) | High | Standard | High | High | Standard |
| Plate material | Aluminium · epoxy-coated aluminium | Aluminium · epoxy-coated aluminium | Aluminium · epoxy-coated aluminium | Stainless steel | Stainless steel |
| Plate size (single or multi-module) | 200 – 3000 mm | 500 – 3000 mm | 600 – 3000 mm | 600 – 2400 mm | 600 – 2550 mm |
| Max. differential pressure | 1,800 Pa | 3,000 Pa | 3,800 Pa | 4,000 Pa | On request |
Every cross-flow model has a clear advantage depending on the application. HumiTech selects the right model and size with the HEATEX selection software.
Options for cross-flow heat exchangers
Besides size and performance, each heat exchanger can be configured with options to suit the application.
Corrosion Protection
Temperature & Flow ManagementBypass & dampers
Dampers protect the heat exchanger when it approaches the freezing point. HEATEX dampers suit close/open bypass sections connected to a cross-flow plate heat exchanger.
Extra TightnessAquaSeal
All plate crevices are filled with a special polymer for water-tightness and an even higher air-tightness, for high humidity or direct water exposure.
Counter-flow heat exchanger features
Counter-flow heat exchangers are particularly effective because they make use of even small temperature differences. With a robust build and high thermal performance they suit electronics cooling, demanding environments and energy-efficient heat recovery.
- High efficiency · two counter-flowing airflows maximise heat transfer.
- Wide range of applications · telecom cooling and inverter / converter cooling.
- Technical reliability · robust materials and stable performance in continuous operation.
- HEATEX Model M · a lightweight counter-flow core developed for thermal management such as enclosure cooling.
Options for counter-flow heat exchangers
Each counter-flow exchanger is configured to the project’s size and performance requirements, with these options:
Epoxy Coated PlatesCorrosion protection
All HEATEX aluminium heat exchangers are available with epoxy-coated plates for better corrosion protection in demanding applications such as coastal environments.
Airflow ManagementAirflow configuration
Model M is built to order with a double L-flow, double U-flow or L+U-flow configuration to suit the unit layout.
Tests and special conditions
- Individual air tightness test and report at 400 Pa
- Individual water tightness test and report
- ATEX-oriented test protocol for aluminium exchangers
- Silicone sealing for air temperatures up to 200 / 240 °C